• Home
  • Sitemap
  • Contact us
Fire Sci. Eng Search

CLOSE


Int J Fire Sci Eng > Volume 27(5); 2013 > Article
Fire Science and Engineering 2013;27(5):19-25.
DOI: https://doi.org/10.7731/KIFSE.2013.27.5.19    Published online October 31, 2013.
열매유 보일러 내부화재에 따른 온도 및 속도분포 해석
김엽래, 손봉세
1경민대학교 소방행정과
2가천대학교 소방방재학과
Temperature and Flow Velocity Analysis for Fire in Synthetic Heat Transfer Fluid Boiler
Kim Yeob-Rae, Son Bong-Sei
1Dept. of Fire Protection Administration, Kyungmin Univ.
2Dept. of Fire and Disaster Protection Engineering, Gachon Univ.
요약
열매유(Synthetic Heat Transfer Fluid)의 가열현상으로 인하여 보일러에서 화재가 발생한 경우에 대하여 컴퓨터 수치해석을 통한 1, 2, 3차 패스 및 연소대의 온도 및 속도분포를 파악하였다. 보일러의 인버터의 고장으로 인하여 보일러 내부의 유동이 다소 불안전한 상태에서 운전이 지속되면서 화염의 유동과 속도가 불안정하게 작동된 것으로 판단된다. 열매유의 누유현상은 화재초기에 약 120 kg/min로 분출하면서 기화되었고, 또한 화염은 2차 패스와 3차 패스까지 열전달 현상이 확대되었다. 2차 패스에서의 최고온도는 $1,059^{circ}C$, 3차 패스의 최고온도는 $1,007^{circ}C$이고, 3차 패스 아래쪽에서는 온도가 $767^{circ}C$인 것으로 컴퓨터 시뮬레이션 결과에서 알 수 있었다. 특히, 연소대는 1차 패스 균열부위에서 열매유가 분출되면서 턴테이블 위로 쌓였으며, 연소대 하부에서 온도는 플래시오버 현상에 의하여 $183^{circ}C$까지 올라갔다. 따라서 연소대 내부의 온도는 $1,200^{circ}C$ 이상으로 예측되었으며, 연소대의 온도는 순간적으로 여러 차례 최고점의 온도까지 도달되어 연소대에서 여러 차례 폭발현상이 발생한 것으로 판단되었다.
Abstract
The fire took place in the synthetic heat transfer fluid boiler. This study uses simulation to investigate the first, second and third passes and the temperature in the fire burner. The boiler's internal fluid is more or less unsteady due to the out of order inverter. As the operation continues, the flame's flow and speed are unsteady. The synthetic heat transfer fluid leak spouted about 120 kg/min in the form of vapor in the early period of the fire. The flame extended to the second and third passes. The highest temperature of the second and third pass is $1059^{circ}C$ and $1007^{circ}C$, respectively. The simulation shows that the temperature is $767^{circ}C$ in the low part of the third pass. The synthetic heat transfer fluid spouted through the cracked part of the fire box in the first pass and accumulated on the turn table. The temperature rises to $183^{circ}C$ in the low part of the burner. Therefore, it is expected that the temperature of the interior of the fire box is above $1200^{circ}C$. The temperature of the burner rises to a maximum level several times in a short period. On account of that, several explosions occur in the fire burner.
Key Words: Synthetic heat transfer fluid, Pass, Fire burner, Inverter, Explosion
TOOLS
Share :
Facebook Twitter Linked In Google+ Line it
METRICS Graph View
  • 2 Crossref
  •    
  • 88 View
  • 0 Download
Related articles in Int J Fire Sci Eng.


ABOUT
BROWSE ARTICLES
EDITORIAL POLICY
AUTHOR INFORMATION
Editorial Office
Room 906, The Korea Science Technology Center The first building, 22, Teheran-ro 7 Gil, Gangnam-gu, Seoul, Republic of Korea
Tel: +82-2-555-2450/+82-2-555-2452    Fax: +82-2-3453-5855    E-mail: kifse@hanmail.net                

Copyright © 2024 by Korean Institute of Fire Science and Engineering.

Developed in M2PI

Close layer
prev next