1. National Fire Agency. “2019 Fire Statistical Yearbook”, (2019).
2. E Zalok, G. V Hadjisophocleous and J. R Mehaffey, “Fire loads in commercial premises”, Fire and Materials, Vol. 33, pp. 63-78 (2009),
https://doi.org/10.1002/fam.984.
3. A Lönnermark and H Ingason, “Fire spread in large industrial premise and warehouses”, SP report, (2005), pp. 21.SP Technical Research Institute of Sweden (2005),
https://rib.msb.se/Filer/pdf/23962.pdf.
4. K McGrattan, A Lock, N Marsh, M Nyden, S Bareham and M Price, “Cable Heat Release, Ignition, and Spread in Tray Installations During Fire (CHRISTIFIRE) Phase 1:Horizontal Trays”, NUREG/ CR-7010, Vol. 1, United States Nuclear Regulator Commission (2012),
https://www.nrc.gov/docs/ML1221/ML12213A056.pdf.
6. H. S Yun, H. S Han and C. H Hwang, “Development and Calibration of Reduced-Size Plate Themometer for Measuring Incident Heat Flux”, Journal of Fire Sciences, Vol. 39, pp. 19-35 (2020),
https://doi.org/10.1177/0734904120958602.
7. B. J Kim, J. H Cho, C. H Hwang and S. H Park, “A Study on the Devlopment of a Low-cost Device for Measuring the Optical Smoke Density”, Fire Science and Engineering, Vol. 29, No. 4, pp. 81-88 (2015),
https://doi.org/10.7731/KIFSE.2015.29.4.081.
9. ISO 17554. “Reaction to Fire tests - Mass Loss Measurement”, International Standards Organization, Geneva, Switzerland (2014).
10. ASTM E906. “Test Method for Heat and Visible Smoke Release Rates for Materials and Products”, American Society for Testing and Materials, West Conshohocken, PA (1999).
13. A Tewarson, “Generation of Heat and Chemical Compounds in Fires”, SFPE Handbook of Fire Protection Engineering, 3ed. Section 3 - Chapter 4, NFPA Press, Boston, (2002).
14. W. M Thornton, “The Relation of Oxygen to the Heat of Combustion of Organic Compounds”, Philosophical Magazine Series 6, Vol. 33, No. 194, pp. 196-203 (1917),
https://doi.org/10.1080/14786440208635627.
15. C Huggett, “Estimation of Rate of Heat Release by Means of Oxygen Consumption Measurements”, Fire and Materials, Vol. 4, No. 2, pp. 61-65 (1980),
https://doi.org/10.1002/fam.810040202.
16. S. C Kim, “Measurement of Heat Release Rate by Carbon Dioxide Generation Method for Methane Fire”, Fire Science and Engineering, Vol. 34, No. 2, pp. 1-6 (2020),
https://doi.org/10.7731/KIFSE.1e176e77.
17. NFPA 92B:“Smoke management systems in malls, atria, and large spaces”, (1991).
18. R. A Bryant and G. W Mulholland, “A Guide to Characterizing Heat Release Rate Measurement Uncertainty for Full-scale Fire Tests”, Fire and Material, Vol. 32, pp. 121-139 (2008),
https://doi.org/10.1002/fam.959.
19. R. A Bryant, T. J Ohlemiller, E. R Johnsson, A Hamins, B. S Grove, G. W Guthrie, A Maranghides and G. W Mulholland, “The NIST 3 MW Quantitative Heat Release Rate Facility-Description and Procedures”, NISTIR 7502, (2004),
https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication1007.pdf.